What are the performance characteristics of three cone drill bits

The use of this product can conduct a very detailed analysis of the hardness and plasticity of rocks in the formation, and can test the wear resistance of the product. We can conduct certain tests based on its specific efficacy, and also pay attention to the product model when selecting. The mechanical properties of rocks at different positions in the Earth's crust also vary greatly. For rocks buried deeper, multiple compressive stresses are good, and their strength increases with increasing degrees. Generally, some rocks are relatively loose and have a soft texture. During this process, the rotational speed of the cone drill bit is relatively high, and it is also relatively low, The rock in the lower part is relatively hard, so the rotational speed of the cone bit in this part is relatively low and the pressure is relatively high, and the working time is also relatively long. When working, it is necessary to set corresponding data based on the actual performance characteristics of PDC and PDC drill bit manufacturers' products. It is important to follow the correct method of use to ensure that the product will not be damaged during use. Every user must strictly follow the correct operating steps.

Before using the three cone drill bit, conduct a certain inspection to see if there is any damage, and place it on a certain rubber pad and wooden board for use. This product is made of a high degree of alloy teeth and has excellent impact resistance, which also reduces the probability of tooth breakage during use.